Brownells Ireland - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories Ireland

REDMANS .22 CALIBER RIMFIRE BARREL LINERS


Brownells/Redman 1-16 Twist 25" Liner, .22LR rimfire

There are untold thousands of rimfire .22’s over the country today that need only a barrel liner to bring them back to their original shooting abilities. More...

Product no.: 770100022 770100022
Easily & Professionally Reline Rimfire Rifle Barrels In Your Shop; Made By One Of The Most Respected Names In The Liner Industry
There are untold thousands of rimfire .22’s over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Plus, a lot of shooters want to convert to one of the .17 rimfires. Brownells .22 Barrel Liners, made by Redman Mfg., are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. With the Brownell system, barrel liner installation is not difficult. It can be done with a minimum of tools and shop equipment. Your original investment is quickly paid off in the first few jobs. The instruction booklet gives complete, easy-to-follow details for either the old, classic method of soldering the liners in or, the more modern method of using ACRAGLAS® for the permanent bond between barrel and liner.You’ll find that along with a relining, most of your customers will also want a blue job (Solder or ACRAGLAS will both stand hot bluing temps); a stock refinish and probably action work - “Make it like new” are the usual instructions. This, you can do.When deciding to offer this service for your trade areas, you should also consider the price and quality of some new guns today and tightening up of your customers’ spending habits. By relining, they can often have a better gun for less money.Barrel Liner Instruction Book details the systems used by gunsmiths Bob Schuetz, Willis Sprunger and Ralph Walker. Walker used a variable speed hand drill and ACRAGLAS to hold the liner in. Schuetz solders the liner in place. Sprunger extended a regular bit, drilled the hole in a lathe and bonded with ACRAGLAS. 8½" (21.6cm) x 11" (27.9cm). 16 pages. Instructions FREE, not included. Please request; not sent automatically or click here for a PDF.WARNING: These Redman/Brownell gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description below. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury.

SPECS: 4140 steel. .223" (5.6mm) groove diameter for .22 Short and Long Rifle (LR), 1-16 twist (LR) or 1-20 twist for Short. 5/16" (7.9mm) O.D., 25" Liner - 26-3/8" (67cm) overall, 25" (63.5cm) usable length. 32" Liner - 32" (81.2cm) overall, 30-5/8" (77.7cm) usable length. Not chambered.

51.7 138.6 3 EUR
770100022
Brownells/Redman 1-16 Twist 25" Liner, .22LR rimfire There are untold thousands of rimfire .22’s over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Plus, a lot of shooters want to convert to one of the .17 rimfires. Brownells .22 Barrel Liners, made by Redman Mfg., are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. With the Brownell system, barrel liner installation is not difficult. It can be done with a minimum of tools and shop equipment. Your original investment is quickly paid off in the first few jobs. The instruction booklet gives complete, easy-to-follow details for either the old, classic method of soldering the liners in or, the more modern method of using ACRAGLAS® for the permanent bond between barrel and liner.You’ll find that along with a relining, most of your customers will also want a blue job (Solder or ACRAGLAS will both stand hot bluing temps); a stock refinish and probably action work - “Make it like new” are the usual instructions. This, you can do.When deciding to offer this service for your trade areas, you should also consider the price and quality of some new guns today and tightening up of your customers’ spending habits. By relining, they can often have a better gun for less money.Barrel Liner Instruction Book details the systems used by gunsmiths Bob Schuetz, Willis Sprunger and Ralph Walker. Walker used a variable speed hand drill and ACRAGLAS to hold the liner in. Schuetz solders the liner in place. Sprunger extended a regular bit, drilled the hole in a lathe and bonded with ACRAGLAS. 8½" (21.6cm) x 11" (27.9cm). 16 pages. Instructions FREE, not included. Please request; not sent automatically or click here for a PDF.WARNING: These Redman/Brownell gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description below. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury.
52.1 EUR 0 € 52.10 *

Is back orderable
Specs: Cartridge: 22 Long Rifle

Restrictions

  • U.S. export restrictions apply This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

Attributes

Cartridge: 22 Long Rifle

Item details

Made in USA
ECCN: I(g)




770100122
Brownells/Redman 1-20 Twist 25" Liner, .22 Short rimfire There are untold thousands of rimfire .22’s over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Plus, a lot of shooters want to convert to one of the .17 rimfires. Brownells .22 Barrel Liners, made by Redman Mfg., are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. With the Brownell system, barrel liner installation is not difficult. It can be done with a minimum of tools and shop equipment. Your original investment is quickly paid off in the first few jobs. The instruction booklet gives complete, easy-to-follow details for either the old, classic method of soldering the liners in or, the more modern method of using ACRAGLAS® for the permanent bond between barrel and liner.You’ll find that along with a relining, most of your customers will also want a blue job (Solder or ACRAGLAS will both stand hot bluing temps); a stock refinish and probably action work - “Make it like new” are the usual instructions. This, you can do.When deciding to offer this service for your trade areas, you should also consider the price and quality of some new guns today and tightening up of your customers’ spending habits. By relining, they can often have a better gun for less money.Barrel Liner Instruction Book details the systems used by gunsmiths Bob Schuetz, Willis Sprunger and Ralph Walker. Walker used a variable speed hand drill and ACRAGLAS to hold the liner in. Schuetz solders the liner in place. Sprunger extended a regular bit, drilled the hole in a lathe and bonded with ACRAGLAS. 8½" (21.6cm) x 11" (27.9cm). 16 pages. Instructions FREE, not included. Please request; not sent automatically or click here for a PDF.WARNING: These Redman/Brownell gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description below. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury.
51.7 EUR 0 € 51.70 *

Is back orderable
Specs: Cartridge: 22 Short
770100216
Brownells/Redman 1-16 Twist 32" Liner, .22LR rimfire There are untold thousands of rimfire .22’s over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Plus, a lot of shooters want to convert to one of the .17 rimfires. Brownells .22 Barrel Liners, made by Redman Mfg., are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. With the Brownell system, barrel liner installation is not difficult. It can be done with a minimum of tools and shop equipment. Your original investment is quickly paid off in the first few jobs. The instruction booklet gives complete, easy-to-follow details for either the old, classic method of soldering the liners in or, the more modern method of using ACRAGLAS® for the permanent bond between barrel and liner.You’ll find that along with a relining, most of your customers will also want a blue job (Solder or ACRAGLAS will both stand hot bluing temps); a stock refinish and probably action work - “Make it like new” are the usual instructions. This, you can do.When deciding to offer this service for your trade areas, you should also consider the price and quality of some new guns today and tightening up of your customers’ spending habits. By relining, they can often have a better gun for less money.Barrel Liner Instruction Book details the systems used by gunsmiths Bob Schuetz, Willis Sprunger and Ralph Walker. Walker used a variable speed hand drill and ACRAGLAS to hold the liner in. Schuetz solders the liner in place. Sprunger extended a regular bit, drilled the hole in a lathe and bonded with ACRAGLAS. 8½" (21.6cm) x 11" (27.9cm). 16 pages. Instructions FREE, not included. Please request; not sent automatically or click here for a PDF.WARNING: These Redman/Brownell gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description below. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury.
138.6 EUR 4 € 138.60 *

In stock
Specs: Cartridge: 22 Long Rifle
Easily & Professionally Reline Rimfire Rifle Barrels In Your Shop; Made By One Of The Most Respected Names In The Liner Industry
There are untold thousands of rimfire .22’s over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Plus, a lot of shooters want to convert to one of the .17 rimfires. Brownells .22 Barrel Liners, made by Redman Mfg., are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. With the Brownell system, barrel liner installation is not difficult. It can be done with a minimum of tools and shop equipment. Your original investment is quickly paid off in the first few jobs. The instruction booklet gives complete, easy-to-follow details for either the old, classic method of soldering the liners in or, the more modern method of using ACRAGLAS® for the permanent bond between barrel and liner.You’ll find that along with a relining, most of your customers will also want a blue job (Solder or ACRAGLAS will both stand hot bluing temps); a stock refinish and probably action work - “Make it like new” are the usual instructions. This, you can do.When deciding to offer this service for your trade areas, you should also consider the price and quality of some new guns today and tightening up of your customers’ spending habits. By relining, they can often have a better gun for less money.Barrel Liner Instruction Book details the systems used by gunsmiths Bob Schuetz, Willis Sprunger and Ralph Walker. Walker used a variable speed hand drill and ACRAGLAS to hold the liner in. Schuetz solders the liner in place. Sprunger extended a regular bit, drilled the hole in a lathe and bonded with ACRAGLAS. 8½" (21.6cm) x 11" (27.9cm). 16 pages. Instructions FREE, not included. Please request; not sent automatically or click here for a PDF.WARNING: These Redman/Brownell gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description below. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury.

SPECS: 4140 steel. .223" (5.6mm) groove diameter for .22 Short and Long Rifle (LR), 1-16 twist (LR) or 1-20 twist for Short. 5/16" (7.9mm) O.D., 25" Liner - 26-3/8" (67cm) overall, 25" (63.5cm) usable length. 32" Liner - 32" (81.2cm) overall, 30-5/8" (77.7cm) usable length. Not chambered.