Brownells Ireland - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories Ireland

BROWNELLS METAL CHECKERING FILES


30 LPI (#0)

30 LPI More...

Product no.: 080310411 613548064573 080310411
Dead-On Spacing For Grip Frames, Hammer Spurs and More
The only way to get true, accurate line spacing when checkering backstraps, triggerguards, grip frames, ribs and hammer spurs; anywhere an improved gripping surface is needed. Finer cuts give a nice matting effect to reduce glare and light distortion. Procedure is very similar to wood checkering. Layout your master lines (or use a guide like our .45 Checkering Guide), then establish the pattern by moving the file a few teeth each time using the previous lines as the guide. Once the pattern is fully laid out, bring to final depth with a 60° needle file.

SPECS: 8" (20.3cm) length x ½" (12.7mm) wide. Cutting area: 6" (15.2cm) x ½" (12.7mm).

BROWNELLS
71.7 119 6 EUR
080310411
30 LPI (#0)
Mfr Part: 31041 613548064573 30 LPI (#0)
71.7 EUR 9 € 71.70 *

In stock
Specs: Length: 6 Style: Checkering Files

Description

30 LPI (#0)

Attributes

Length: 6 Style: Checkering Files




080310401
20 LPI (#00)
Mfr Part: 31040 613548064580 20 LPI (#00)
72.2 EUR 21 € 72.20 *

In stock
Specs: Length: 6 Style: Checkering Files
080310421
40 LPI (#1)
Mfr Part: 31042 613548064597 40 LPI (#1)
75 EUR 5 € 75.00 *

In stock
Specs: Length: 6 Style: Checkering Files
080310431
50 LPI (#2)
Mfr Part: 31043 613548064603 50 LPI (#2)
75 EUR 2 € 75.00 *

In stock
Specs: Length: 6 Style: Checkering Files
080310451
75 LPI (#4)
Mfr Part: 31045 613548064610 75 LPI (#4)
97.9 EUR 2 € 97.90 *

In stock
Specs: Length: 6 Style: Checkering Files
080000177
25 LPI (#00)
Mfr Part: 3104025 25 LPI (#00)
119 EUR 9 € 119.00 *

In stock
Specs: Length: 6 Style: Checkering Files
Dead-On Spacing For Grip Frames, Hammer Spurs and More
The only way to get true, accurate line spacing when checkering backstraps, triggerguards, grip frames, ribs and hammer spurs; anywhere an improved gripping surface is needed. Finer cuts give a nice matting effect to reduce glare and light distortion. Procedure is very similar to wood checkering. Layout your master lines (or use a guide like our .45 Checkering Guide), then establish the pattern by moving the file a few teeth each time using the previous lines as the guide. Once the pattern is fully laid out, bring to final depth with a 60° needle file.

SPECS: 8" (20.3cm) length x ½" (12.7mm) wide. Cutting area: 6" (15.2cm) x ½" (12.7mm).