Brownells Ireland - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories Ireland

AMERICAN DEFENSE MANUFACTURING RECON-S NO OFFSET SCOPE MOUNT


RECON 1 20 MOA Scope Mount No Offset

Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. More...

Product no.: 100017125 818503018695 100017125
Rock-Solid Mounts With Quick-Detach System
Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. Quick-Release Scope Mount one-piece base with dual-lever system provides the same solid mounting and fast removal and reattachment.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 4½” (11.4cm) long. Each ring covers 1” (2.5cm) of scope tube length. Height measured from top of rail to bottom of scope body (both models): .890”.

AMERICAN DEFENSE MANUFACTURING
250.1 250.4 8 EUR
100017125
RECON 1 20 MOA Scope Mount No Offset
Mfr Part: ADRECONS20MOA1S 818503018695 Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. Quick-Release Scope Mount one-piece base with dual-lever system provides the same solid mounting and fast removal and reattachment.
250.3 EUR 1 € 250.30 *

In stock
Specs: Elevation: 20 MOA Finish: Matte Black Height: - Make: - Scope Tube Diameter: 1'' Style: Quick Detach, Picatinny

Attributes

Elevation: 20 MOA Finish: Matte Black Scope Tube Diameter: 1'' Style: Picatinny,Quick Detach

Item details

Made in USA




100003654
30mm Recon-s No Offset Mount, Standard Latch
Mfr Part: ADRECONS30STD 818503010729 30mm Scope Mount
250.3 EUR 6 € 250.30 *

In stock
Specs: Elevation: 0 MOA Finish: Matte Black Height: .890'' Make: Universal Rifles Scope Tube Diameter: 30mm Style: Quick Detach, Picatinny, Weaver
100003653
1" Recon-S No Offset Mount, Standard Latch
Mfr Part: ADRECONS1STD 818503010705 1" Scope Mount
250.1 EUR 4 € 250.10 *

In stock
Specs: Elevation: 0 MOA Finish: Matte Black Height: .890'' Make: Universal Rifles Scope Tube Diameter: 1'' Style: Quick Detach, Picatinny, Weaver
100017128
RECON 35mm 20 MOA Scope Mount No Offset
Mfr Part: ADRECONS20MOA35 818503018855 Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. Quick-Release Scope Mount one-piece base with dual-lever system provides the same solid mounting and fast removal and reattachment.
250.4 EUR 0 € 250.40 *

Is back orderable
Specs: Elevation: 20 MOA Finish: Matte Black Height: - Make: - Scope Tube Diameter: 35mm Style: Quick Detach, Picatinny
100017123
RECON 34mm Scope Mount No Offset
Mfr Part: ADRECONS34STD 818503012242 Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. Quick-Release Scope Mount one-piece base with dual-lever system provides the same solid mounting and fast removal and reattachment.
250.4 EUR 3 € 250.40 *

In stock
Specs: Elevation: 0 MOA Finish: Matte Black Height: - Make: - Scope Tube Diameter: 34mm Style: Quick Detach, Picatinny
100017127
RECON 34mm 20 MOA Scope Mount No Offset
Mfr Part: ADRECONS20MOA34 818503018817 Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. Quick-Release Scope Mount one-piece base with dual-lever system provides the same solid mounting and fast removal and reattachment.
250.4 EUR 2 € 250.40 *

In stock
Specs: Elevation: 20 MOA Finish: Matte Black Height: - Make: - Scope Tube Diameter: 34mm Style: Quick Detach, Picatinny
100017126
RECON 30mm 20 MOA Scope Mount No Offset
Mfr Part: ADRECONS20MOA30 818503018732 Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. Quick-Release Scope Mount one-piece base with dual-lever system provides the same solid mounting and fast removal and reattachment.
250.4 EUR 3 € 250.40 *

In stock
Specs: Elevation: 20 MOA Finish: Matte Black Height: - Make: - Scope Tube Diameter: 30mm Style: Quick Detach, Picatinny
100017124
RECON 35mm Scope Mount No Offset
Mfr Part: ADRECONS35STD 818503010743 Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. Quick-Release Scope Mount one-piece base with dual-lever system provides the same solid mounting and fast removal and reattachment.
250.4 EUR 1 € 250.40 *

In stock
Specs: Elevation: 0 MOA Finish: Matte Black Height: - Make: - Scope Tube Diameter: 35mm Style: Quick Detach, Picatinny
Rock-Solid Mounts With Quick-Detach System
Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. Quick-Release Scope Mount one-piece base with dual-lever system provides the same solid mounting and fast removal and reattachment.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 4½” (11.4cm) long. Each ring covers 1” (2.5cm) of scope tube length. Height measured from top of rail to bottom of scope body (both models): .890”.