Brownells Ireland - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories Ireland
free-freight_topbanner

SINCLAIR INTERNATIONAL SINCLAIR TWO PIECE CLEANING ROD GUIDES


INSERT DEWEY/BORETECH 22 CAL

Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. More...

Product no.: 749013420 749013420
Inserts Sold Separately
Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting, 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. For example, to clean a Remington 700 in .22-250, choose the Standard guide body (fits .308, .243, .30-06, .22-250, etc.) and add the .22 caliber insert to fit your .22 caliber rod. A 700 in .223 would need the small guide body (.222, .223, etc.) to fit the smaller chamber, but uses the same .22 insert to fit the rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately  
SINCLAIR INTERNATIONAL
20.5 25.5 10 EUR
749013420
INSERT DEWEY/BORETECH 22 CAL
Mfr Part: 1004103 Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting, 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. For example, to clean a Remington 700 in .22-250, choose the Standard guide body (fits .308, .243, .30-06, .22-250, etc.) and add the .22 caliber insert to fit your .22 caliber rod. A 700 in .223 would need the small guide body (.222, .223, etc.) to fit the smaller chamber, but uses the same .22 insert to fit the rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
20.5 EUR 29 € 20.50 *

In stock
Specs: Cartridge: 22 Caliber (.223-.224)

Attributes

Cartridge: 22 Caliber (.223-.224)

Item details

Made in USA
ECCN: EAR99




749013417
BORE GUIDE BODY MAGNUM
Mfr Part: 1004094 Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting, 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. For example, to clean a Remington 700 in .22-250, choose the Standard guide body (fits .308, .243, .30-06, .22-250, etc.) and add the .22 caliber insert to fit your .22 caliber rod. A 700 in .223 would need the small guide body (.222, .223, etc.) to fit the smaller chamber, but uses the same .22 insert to fit the rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
22.5 EUR 44 € 22.50 *

In stock
Specs: Cartridge: Belted Magnums
749013415
BORE GUIDE BODY PPC
Mfr Part: 1004092 Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting, 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. For example, to clean a Remington 700 in .22-250, choose the Standard guide body (fits .308, .243, .30-06, .22-250, etc.) and add the .22 caliber insert to fit your .22 caliber rod. A 700 in .223 would need the small guide body (.222, .223, etc.) to fit the smaller chamber, but uses the same .22 insert to fit the rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
22.5 EUR 26 € 22.50 *

In stock
Specs: Cartridge: 6.5 Grendel, 7.62 x 39 mm, PPC Family, 220 Russian
749013419
INSERT DEWEY/BORETECH 20 CAL
Mfr Part: 1004102 Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting, 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. For example, to clean a Remington 700 in .22-250, choose the Standard guide body (fits .308, .243, .30-06, .22-250, etc.) and add the .22 caliber insert to fit your .22 caliber rod. A 700 in .223 would need the small guide body (.222, .223, etc.) to fit the smaller chamber, but uses the same .22 insert to fit the rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
20.5 EUR 11 € 20.50 *

In stock
Specs:
749013421
INSERT BORETECH 6MM
Mfr Part: 1004104 Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting, 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. For example, to clean a Remington 700 in .22-250, choose the Standard guide body (fits .308, .243, .30-06, .22-250, etc.) and add the .22 caliber insert to fit your .22 caliber rod. A 700 in .223 would need the small guide body (.222, .223, etc.) to fit the smaller chamber, but uses the same .22 insert to fit the rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
22.5 EUR 92 € 22.50 *

In stock
Specs: Cartridge: 243/6 mm (.243)
749013423
INSERT DEWEY 35 CAL
Mfr Part: 1004106 Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting, 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. For example, to clean a Remington 700 in .22-250, choose the Standard guide body (fits .308, .243, .30-06, .22-250, etc.) and add the .22 caliber insert to fit your .22 caliber rod. A 700 in .223 would need the small guide body (.222, .223, etc.) to fit the smaller chamber, but uses the same .22 insert to fit the rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
22.5 EUR 4 € 22.50 *

In stock
Specs:
749013418
INSERT DEWEY/BORETECH 17 CAL
Mfr Part: 1004101 Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting, 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. For example, to clean a Remington 700 in .22-250, choose the Standard guide body (fits .308, .243, .30-06, .22-250, etc.) and add the .22 caliber insert to fit your .22 caliber rod. A 700 in .223 would need the small guide body (.222, .223, etc.) to fit the smaller chamber, but uses the same .22 insert to fit the rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately

Unfortunately, this product cannot be ordered.
Specs: Cartridge: 17 Caliber (.172)
749013416
BORE GUIDE BODY STD (.308)
Mfr Part: 1004093 Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting, 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. For example, to clean a Remington 700 in .22-250, choose the Standard guide body (fits .308, .243, .30-06, .22-250, etc.) and add the .22 caliber insert to fit your .22 caliber rod. A 700 in .223 would need the small guide body (.222, .223, etc.) to fit the smaller chamber, but uses the same .22 insert to fit the rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
22.5 EUR 2 € 22.50 *

In stock
Specs:
749013422
INSERT DEWEY/BORETECH 270-30 CAL
Mfr Part: 1004105 Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting, 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. For example, to clean a Remington 700 in .22-250, choose the Standard guide body (fits .308, .243, .30-06, .22-250, etc.) and add the .22 caliber insert to fit your .22 caliber rod. A 700 in .223 would need the small guide body (.222, .223, etc.) to fit the smaller chamber, but uses the same .22 insert to fit the rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
25.5 EUR 68 € 25.50 *

In stock
Specs: Cartridge: 30 Caliber (.308)
749013414
BORE GUIDE BODY SMALL (.223)
Mfr Part: 1004091 Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting, 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. For example, to clean a Remington 700 in .22-250, choose the Standard guide body (fits .308, .243, .30-06, .22-250, etc.) and add the .22 caliber insert to fit your .22 caliber rod. A 700 in .223 would need the small guide body (.222, .223, etc.) to fit the smaller chamber, but uses the same .22 insert to fit the rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately
22.5 EUR 86 € 22.50 *

In stock
Specs: Cartridge: 223 Family
Inserts Sold Separately
Our two-piece bore guide system helps the shooter get the best possible alignment of the cleaning rod to the bore by using a guide within a guide. The guide body goes into the action and seals the chamber with an O-ring, like a traditional bore guide. A separate guide slides into the rear of the guide body to provide a slip fit for the cleaning rod. The tight-fitting, 8" insert prevents the rod from flexing and keeps it centered, so it will not contact the rifling while you clean. Choose the guide body to fit the cartridge your rifle is chambered for, then select the insert with the inside diameter that fits your rod. For example, to clean a Remington 700 in .22-250, choose the Standard guide body (fits .308, .243, .30-06, .22-250, etc.) and add the .22 caliber insert to fit your .22 caliber rod. A 700 in .223 would need the small guide body (.222, .223, etc.) to fit the smaller chamber, but uses the same .22 insert to fit the rod. Both guide body and insert are machined from Delrin with rubber O-ring seals to prevent solvent from getting into the action. Bore guide bodies are made to fit the Remington 700 and other rifles with .700" diameter bolts. Inserts Sold Separately